Install tape drive sco

Whenever any result is sought by its aid, the question will then arise — by what course of calculation can these results be arrived at by the machine in the shortest time? Charles Babbage. Topics covered here: How do I know what host adaptor to choose? How to add the tape drive Various relinking problems on 5. How to add the tape drive You add a tape drive by running "mkdev tape". Here's the output of "sconf -v" on one of my machines: Sdsk alad 0 0 0 0 Sdsk alad 0 0 1 0 Stp alad 0 0 3 0 Sdsk alad 0 0 4 0 Srom alad 0 0 6 0 This shows me that the tape Stp is attached to an "alad" controller and is at id 3.

X Plainly there are problems with mkdev tape on 5. DAT tape doesn't eject Pushing the eject button doesn't work. Jeff Liebermann points out: HP drives have a not-so-secret method of ejecting the tape when busy.

This could simply mean that this is not your default tape drive. To do that on OSR5, you'd say tape -a 0 setcomp Another area of problem is hardware block size. To find out what the block size is, do: tape getblk note- you may need a tape in the drive to do this! Once you know, you can set it to match on the other machine: tape -a 0 setblk tape -a setblk There is also the issue of tapes set to variable block size vs.

Fixed block sizes could be , or SCO 3. This newsgroup post offers some other useful information. I was unable to find the original: From: "D. NOTE: There is personal opinion strewed in with objective fact here. The reader should be able to discern where I digress. There were no standards, and vendors tended to use different compression methods.

Cross vendor compatibility was almost nil. Data could be written on one drive and read on another quite freely, with three exceptions These couldn't read compressed tapes. Reading between them is usually simply a matter of matching the block size.

As someone mentioned, plans for a DDS5 have been cancelled. Higher densities write faster than lower densities, although if you put a lower density tape in a higher density drive, it will operate at the slower speed.

In any event, DDS3 and DDS4 are fast enough that the speed limit on them is usually the limit that systems provide data to them. All are wonderful devices. In my personal opinion We able to restore the usr but now we having a problem with our tape drive.

Previously we could write to the with Problems installing a tape storageworks on ML G5 with sas hdd and alp card. I checked with the docs, and got all of the required drivers on the box. Now, I'm trying to mount an external scsi tape drive with no luck.

I set the scsi address on the external drive to 0. Here's what I'm coming Filesystems, Disks and Memory. Hi all, please help I am stuck. I have installed a external unipack scsi tape drive. The tape drive is Exabyte Eliant All I did was connected scsi cable and power it on. When issued "probe-scsi-all" command, the tape is correctly identified.

However, when issued "dmesg more" command, the The apic driver panics with the message, "Not all CPUs have initialized their interrupt controllers. There is a lock timeout panic in sptfree. This problem can generate the following error at runtime: dynamic linker: [binary name]: can't set protections on segment of length [hex number] at [hex number] where "[binary name]" is the name of the program being executed, and "[hex number]" is the length of the segment and the address of the segment.

See the cover letter for more details on specific problems addressed by this SLS. Previously, it was only possible to use these CD-ROM drives by configuring them after the installation of the operating system.

The linker failed to search the second default directory for required libraries. This SLS was created for Oracle7. It also corrects a problem where the read filemark ioctl always skipped one filemark. For a detailed list of updates to sendmail from version 8.

NOTE: ossa has been removed and is superseded by oss This problem could cause a regular user to inappropriately gain root access to the system. It also contains the domestic version of the encryption libraries: libcrypt. In this case, faster CPUs can generally be defined as systems employing a Pentium processor executing at 75Mhz or faster. The problem occurs when the keyboard locks up and no longer handles keyboard events.

It ensures that any spurious interrupts generated by the hardware is ignored. This SLS also includes a new lockd driver. The problem is that the spx driver assumes that there is always room on the downstream queue for a streams message block; if there is no room, the connection is forcibly disconnected.

This assumption is incorrect and results in needless disconnections. I used a regular floppy at install, but now I need to make a USB floppy work. Join Date: Feb Eclectic Wave. Check your motherboard bios for a floppy controller. Just because you don't have a floppy drive in your computer doesn't mean that the mother board doesn't have a floppy drive controller on it.

Most mother boards still have the onboard floppy controller on them. Sco 6 will see the floppy drive controller, and even though there is no floppy drive on it, Sco 6 will consider the onboard floppy contoller as FD0, thus any USB floppy you connect will end up being FD1. You then need to address the USB floppy as if it was the 2nd floppy drive, not the first.

Hello All, I faced a unique issue. I have written a script for transferring backup data on my host machine to a USB Flash drive. The Flash drive must be of 16GB size. So, my script creates two primary partitionon the USB flash drive. I require approx cylinders for the first partition on Boot Loaders. How to install grub on USB flash drive? I wanna install grub on my flash drive for rescue usage. My computer installs winxp, and I have fedora12 installed in vmware.